Pellet Stove Furnace

Pellet stoves can be used as a supplemental heat source or, with proper venting, a primary heating option. These stoves are available in freestanding models or as fireplace inserts. They can give the appearance of an old-fashioned wood-burning fireplace.

The auger transports the pellets out of the hopper into the combustion chamber, where they are burnt and produce heat. Sensors are used to monitor the fire and alter the rate of operation to ensure your desired temperature in the room.

1. Energy Efficiency

Pellet stoves burn renewable non-toxic fuel composed of compressed sawdust, bark, wood chips, and other materials that are normally dumped in landfills, but can be used to create an efficient and clean source of heating. They help homeowners reduce their energy consumption, and therefore greenhouse gas emissions. Many users of pellet stoves say that they have recouped their initial investment in a couple of years, by reducing their heating costs.

Pellets are extremely compressed and more solid than natural wood, which makes them more efficient to burn. They also produce less creosote compared to traditional wood-burning fires. They are also packaged in plastic bags that seal out moisture, and require less frequent cleaning.

Like other heating systems pellet stoves need to be properly sized and vented. A qualified technician can assess your venting and space requirements to ensure the best results.

In the process of installation, the hearth is constructed to fit the space and the vent is inserted through a pre-cut hole the siding of your home. The vent can be run through a sidewall or roof depending on your preference and the local laws.

Once the vent and hearth are complete, the pellet stove can be connected and turned on. Some manufacturers provide the option of a remote control to make it simple to begin and keep the fire burning, whereas other manufacturers offer additional sensors that check airflow and combustion as well as flue temperatures and pressure. If the system is able to determine that it requires more pellets or less, it sends a signal to the auger that it should accelerate or slow down accordingly.

Every stove has a storage hopper that holds from 35 to 130 pounds of pellets until required. Hopper capacities affect how often the stove needs to be refilled and larger hoppers allow for longer periods between refills. A grille pulls fresh air from the room and passes it over an exchanger that then is able to blow heated air into the living space through convection. A grate or an auger distributes the pellets, while a pan underneath will collect any unburnt ones as well as the ashes of combustion.

Although pellet stoves are more efficient than wood-burning stoves, they're not as efficient as natural gas furnaces or electric heaters. The electric components that drive their motorized parts require an electrical supply, which could be problematic during an power outage, though backup systems are available for generators and batteries.

2. Low Maintenance

Pellet stoves are extremely efficient, however, like any other major heating appliance, they require some care to ensure that they function properly. Cleaning your stove and exhaust vent regularly will help prevent the accumulation of harmful creosote. This can cause a fire or explosion that could damage your stove or even your home.

A pellet stove is a device that burns compressed natural wood particles or other materials (like nutshells, corn kernels or small pieces of wood scraps). An auger powered by electricity feeds the pellets from a fuel tank into the burner, and into the combustion chamber. The thermostat you set controls the speed of pellets being fed to the burner. This allows the fire to remain roaring or modulate lower and even go out according to the temperature you set. When the fire goes out the ash is thrown into an empty ash tray underneath the burner that can be easily removed and then disposed of.

Pellets are produced from the byproducts of lumber processing that would otherwise be thrown away. They are a sustainable source and emit less particulates than traditional wood-burning appliances, making them a cleaner burning heat source. The amount of carbon monoxide, carcinogens and other harmful chemicals produced from pellet stoves is far lower than with newer wood stoves that are EPA-certified.

They are not required to be vented through a chimney, like is the case with traditional wood stoves. Instead, they can be vented correctly via a wall, or any other exterior structure. Pellet stoves come with flue ports that are located on the rear or top of the appliance. They are connected to a ventpipe that extends outside the home.

A pellet stove has one disadvantage it requires you to purchase or store enough fuel pellets to last the whole winter season. On average, owners of pellet stoves use three tons of pellets over the course of the winter at $200 per ton. The cost can be high, but they are less expensive than buying firewood and then hauling it away for a fireplace or wood-burning stove. You should buy enough pellets so that your stove can run through the winter's coldest months. Additionally, you will must have a space to keep the pellets (preferably cool and dry).

3. Reduced Carbon Footprint

Pellet stoves make use of renewable biomass fuels to generate heat, which reduces the need for fossil fuels that are finite. This reduces carbon footprints as well as diversifying energy sources for homes.

Emissions from pellet stoves are much lower than those from wood stoves, and even the latest EPA-certified ones. Emissions from pellet stoves are also significantly less than those from gas furnaces. Pellets are made up of compressed sawdust, bark, and other lumber waste. They may also contain various other substances like soybeans, corn as well as nutshells, cherries pits and agricultural waste. When they are burned, they release fewer particulates (leading to respiratory issues and allergies), carcinogens and carbon monoxide as well as nitrogen oxides.

The primary difference between the wood stove and the pellet stove is the feed system. Pellet stoves come with hoppers to store the pellets. When the thermostat or sensors suggest that the room needs heating, the auger is turned and the pellets are fed into the combustion chamber where they burn and produce heat. The combustion chamber's air is pumped through a heat exchanger which transmits heat to the blower. This process results in very low emissions and no creosote check here buildup.

When the hopper is empty, a cyclone removes the ash and deposits it in an ash pan. The stove is fitted with a fan that circulates warm, fresh air into the room. Most pellet stoves require minimal maintenance and feature a large viewing space for you and your family members to enjoy the flames.

The quality of pellets is the main factor that influences the emissions of pellet stoves. The poor quality pellets emit more emissions. When choosing your pellets ensure that they're certified to meet certain standards and don't contain other ingredients such as petroleum or urea. Also make sure you choose a manufacturer that offers a guarantee and will repair or replace components in the event of a problem. Certain states provide homeowners with an incentive to pay taxes if they want to go greener. This is a great opportunity to help offset the initial cost of this kind of stove and make it more affordable to set up.

4. Reduced Noise

Pellet stoves produce less smoke and exhaust when compared to fireplaces that burn wood. A fan is employed to spread heat more evenly throughout the room. This is among the reasons pellet stoves require less maintenance than traditional wood stoves. While wood stoves require frequent cleaning of chemical residues and particles to avoid deterioration, pellet stoves can be cleaned using the use of a vacuum cleaner made of metal.

Many manufacturers have made a conscious effort to design their stoves to be easy to set up and to operate as well as maintain. Their appliances are available in a variety of styles that are designed to match the design of your home. Some models include an app for WIFI, a remote control, and programmable thermostat.

The majority of pellet stoves have an enormous fuel hopper, which can hold 35 to 130 pounds of pellets. The pellets are then fed to the combustion chamber through an auger. The output of heat and the level at which the fire will get is determined by the speed at which pellets are fed into the burner. The hopper can either be filled with hardwood pellets composed of dense wood species such as oak and hickory, or softwood pellets. A lot of stoves can use biomass pellets made of corn and switchgrass. This is an environmentally friendly alternative.

Because pellet stoves use a clean fuel, they generate less smoke than conventional wood-burning fireplaces and require less maintenance. They do not need chimneys and are the best option for retrofits or new construction.

Pellet stoves do not require regular cleaning of creosote and other chemicals like wood stoves. They only need periodic inspections to ensure their proper operation and maintenance. This could involve regular cleaning and inspection of the ash or "clinker" as well as the fans and motors, depending on the model. The dealer of your appliance can explain the proper procedure for your specific model and brand. He can also help you determine the right fuel for your stove, and give information regarding storage and safety.